Heatrae Sadia 95010285 1kw Streamline 10 Oversink Vented Water Heater

Heatrae Sadia Streamline 10L Oversink Point-of-Use Water Heater

The Heatrae Sadia 95010285 Streamline 10 is a compact 10-litre, 1kW oversink vented water heater designed to provide convenient localised hot water at a single sink or outlet.

Its wall-mounted oversink design makes it particularly suitable for washrooms, staff kitchens, utility rooms and light commercial environments where extending the main hot water supply would be inconvenient or inefficient.

The Streamline 10 stores hot water close to the point of use, helping reduce long pipe runs, waiting time and unnecessary water waste. The lower 1kW electrical rating also makes it suitable for installations where a faster 3kW recovery rate is not essential.

Key Features

• Genuine Heatrae Sadia water heater
• Manufacturer part number: 95010285
• 10-litre stored water capacity
• 1kW heating element
• Oversink wall-mounted installation
• Open-vented water heater design
• Compact, low-profile casing
• Externally adjustable thermostat from 5°C to 70°C
• 40°C temperature lock for hand-washing applications
• Dry-start safety cut-out
• Anti-frost protection
• Long-life alloy-sheathed element
• Easy access for servicing and maintenance

Applications for the Streamline 10L Oversink Water Heater

The Heatrae Sadia Streamline 10 is well suited to locations requiring relatively small quantities of hot water at one outlet, including:

• Commercial and workplace washrooms
• Office and staff kitchens
• Utility sinks
• Workshops
• Retail back-of-house areas
• Schools and community buildings
• Portable and temporary buildings

Locating the heater directly above the sink allows hot water to reach the outlet quickly without relying on a distant central cylinder or boiler.

What Is an Oversink Vented Water Heater?

An oversink vented water heater stores and heats water close to the outlet. Unlike an unvented unit, it operates with an open-vented outlet arrangement and must be used with the correct compatible spout or vented outlet components.

The Streamline oversink model is designed to provide a simple local hot water solution where only a cold-water supply and suitable electrical connection are available.

Because this is a vented appliance, it should not be connected to a standard closed outlet arrangement or used as a direct replacement for an unvented water heater without checking the installation requirements.

Why Choose the 1kW Streamline Model?

The 1kW version heats more gradually than the 3kW model but can be appropriate where demand is moderate and rapid recovery is not required.

It is particularly suitable for:

• Lower-use washrooms and kitchens
• Installations with limited electrical capacity
• Locations where hot water demand is spread throughout the day
• Like-for-like replacement of an existing 1kW Streamline heater

For busier locations requiring faster reheating, the Heatrae Sadia 95010287 Streamline 10L 3kW Oversink Water Heater may be the more suitable option.

Temperature Control and Safety Features

The externally adjustable thermostat allows the stored water temperature to be set between 5°C and 70°C according to the application.

A 40°C temperature lock can be used for hand-washing environments, while the dry-start cut-out helps protect the heating element if the unit is energised without sufficient water.

Anti-frost protection provides additional reassurance where the appliance may be installed in colder environments.

Technical Specifications

Choosing the Correct Streamline Water Heater

Before ordering, check the required:

• Capacity: 7L or 10L
• Position: oversink or undersink
• Power rating: 1kW or 3kW
• Outlet and accessory arrangement
• Existing appliance part number

The models may look similar, but the capacity, mounting position and electrical rating are not interchangeable considerations.

Browse the Point of Use Water Heaters collection to compare other compact water heaters for washrooms, kitchens and localised hot water applications.

Why Buy From Heatraq?

Heatraq specialises in genuine Heatrae Sadia water heaters, replacement components and technical support for domestic and commercial hot water systems.

• Genuine manufacturer products
• Specialist product knowledge
• Support in identifying the correct model
• Fast UK delivery
• Water heaters and genuine spares available from one supplier

Always confirm the appliance specification and installation requirements before ordering.